Pyranometers

MS-80SH Pyranometer

  • Class A + Integrated Dome Heating
  • Spectrally Flat & Fast Response
Add to list
Pyranometers

Features

  • <1.4W Integrated High-Efficiency Dome Heating for dew & frost resistance
  • ISO 9060:2018 Class A, Spectrally Flat & Fast Response
  • <0.5s Super-Fast response for always accurate measurements
  • <1W/m² Record Lowest Zero Offset A, and <0.5% Lowest Non-Stability over 5-Years
  • Level A EMI/EMC Electronics Surge Filter & Protection
  • Internal Diagnostics for temperature, tilt, roll, and relative humidity
  • 5 Year Warranty & Recommended Recalibration Interval
  • ISO 17025 accredited calibration

MS-80SH Pyranometer

  • Class A + Integrated Dome Heating
  • Spectrally Flat & Fast Response

With integrated high-efficiency dome heating, the MS-80SH is the new standout choice for value, accuracy, speed, reliability and IEC 61724-1:2021 Class A monitoring.

Add to list
Pyranometers

Features

  • <1.4W Integrated High-Efficiency Dome Heating for dew & frost resistance
  • ISO 9060:2018 Class A, Spectrally Flat & Fast Response
  • <0.5s Super-Fast response for always accurate measurements
  • <1W/m² Record Lowest Zero Offset A, and <0.5% Lowest Non-Stability over 5-Years
  • Level A EMI/EMC Electronics Surge Filter & Protection
  • Internal Diagnostics for temperature, tilt, roll, and relative humidity
  • 5 Year Warranty & Recommended Recalibration Interval
  • ISO 17025 accredited calibration
Find out more

Overview

The MS-80 set new industry standards on launch in 2016 and remains a class-leader for ISO 9060:2018 Class A solar sensors today, one of the few Class A pyranometers before the MS-80S and MS-80SH, in the top tier ‘fast-response’ and ‘spectrally flat’ sub-categories, with unprecedented low-zero-offset behaviour, and a 5-year recalibration interval.

The MS-80S built on that achievement with the addition of Modbus 485 RTU and SDI-12 digital outputs for improved compatibility with data loggers and SCADA systems; also introducing new internal diagnostic systems, now standard to all S-Series sensors, offering visibility over internal temperature, humidity, tilt, and roll angle; helping to ensure optimum performance without the need for regular physical checks.

These features, along with EKO’s unique 5-year recalibration interval, and new low power consumption integrated solid-state dome heater make the MS-80SH one of the best value Class A sensors available; ideal for complex networks, hard to reach locations, and monitoring networks with restricted access.

Specifications

View Product
Attribute MS-80SH View Product
ISO 9060:2018 Class A
Response time 95% < 0.5 Sec
Zero offset A - Thermal Radiation (200W/m²) ± 1W/m²
Zero offset B - Temperature change (5K/hr) ± 1W/m²
Zero offset C - Total zero off-set ± 2W/m²
Non-stability (change/year) < 0.5%/5 years
Non-linearity (100 to 1000W/m²) ± 0.2%
Directional Response (at 1000W/m² | 0 to 80°) ± 10W/m²
Spectral Error ± 0.2%
Temperature Response (-20°C to 50°C) ± 0.5%
Tilt Response (0-90° | 1000W/m²) ± 0.2%
Additional Signal Processing Error < 1 W/m²
Technical Features
Wavelength Range (nm) 285 to 3000
Irradiance range (W/m²) 0 to 4000
Signal Output Modbus 485 RTU / SDI-12
Sensor Diagnostic Relative Humidity ± 2% Temp. ± 0.1% / Tilt Angle ± 1°
Operating temperature -40 to 80°C
Supply voltage 8 to 30 VDC
Power Consumption < 1.4 W
Ingress Protection IP 67
Calibration traceability / uncertainty ISO 17025 / WRR / < 0.7% (k = 1.96)
Standard Cable Length 10m (Optional lengths 20m, 30m, 50m)

Quick Read Whitepaper - Pyranometer Dome Heating

Quick Read Whitepaper - Pyranometer Dome Heating

Visit the Pyranometer Dome Heating Page

Read about Pyranometer Dome Heating and register to download the complete 'Quick Read Whitepaper' to learn more about the MS-80SH with integrated dome heating, how we validated its performance and how you can switch the heating system on or off using 'Hibi' a custom, free-to-download programme developed by EKO.

Frequently paired together

Add all to list

Related Products & Accessories

Added to list

Qty: 1

Already added to list

View list Continue browsing

How it works

  1. Confirm your selection and click on the 'Request a quote' button.
  2. Fill in the form & hit send.
  3. Your list and your contact details will be sent to your local EKO office.
  4. Our team will get back to you as soon as possible with more information or to set up a call or meeting.

Customer Support

Need help? Contact your nearest EKO office or distributor for support and advice about any of our products.

Contact Us